SMA Energy Meter Binding

This Binding is used to display the measured values of a SMA Energy Meter device. It shows purchased and grid feed-in power and energy.

Supported Things

This Binding supports SMA Energy Meter devices.

Discovery

The Energy Meter is discovered by receiving data on the default multicast IP address.

Binding Configuration

No binding configuration required.

Thing Configuration

Usually no manual configuration is required, as the multicast IP address and the port remain on their factory set values. Optionally, a refresh interval (in seconds) can be defined.

Parameter	Name	Description	Required	Default
serialNumber	Serial number	Serial number of a meter.	yes
mcastGroup	Multicast Group	Multicast group used by meter.	yes	239.12.255.254
port	Port	Port number used by meter.	no	9522
pollingPeriod	Polling Period	Polling period used to publish meter reading (in seconds).	no	30

The polling period parameter is used to trigger readout of meter. In case if two consecutive readout attempts fail thing will report offline status.

Channels

Channel	Description
powerIn	Purchased power
powerInL1	Purchased power L3
powerInL2	Purchased power L2
powerInL3	Purchased power L3
powerOut	Grid feed-in power
powerOutL1	Grid feed-in power L1
powerOutL2	Grid feed-in power L2
powerOutL3	Grid feed-in power L3
energyIn	Purchased energy
energyInL1	Purchased energy L1
energyInL2	Purchased energy L2
energyInL3	Purchased energy L3
energyOut	Grid feed-in energy
energyOutL1	Grid feed-in energy L1
energyOutL2	Grid feed-in energy L2
energyOutL3	Grid feed-in energy L3

Full example

N/A

Caught a mistake or want to contribute to the documentation? Edit this page on GitHub (opens new window)