RME Binding

This binding is for the RME RainManager rain water pump and management system

Supported Things


Thing Configuration

The Thing configuration requires the name of the serial port that is used to connect the host with the RME unit


All devices support some of the following channels:

Channel Type IDItem TypeDescription
waterlevelNumberIndicates the % the cistern is filled with water
modeStringIndicates the operation mode of the RME Rain Manager, Automatic or Manual
sourceStringIndicates water source used to supply water, e.g cistern or city
exitpumpSwitchIndicates whether the exit pump is switched on
entrypumpSwitchIndicates whether the entry pump is switched on



Thing rme:manager:m1 [ port="/dev/tty.usbserial-FTGVQA6D" ]


Number RMECisternLevel "Water level [%.1f %%]"(rme) {channel="rme:manager:m1:waterlevel"}
String RMEMode (rme) {channel="rme:manager:m1:mode"}
String RMESource (rme) {channel="rme:manager:m1:source"}
Switch RMEExitPump (rme) {channel="rme:manager:m1:exitpump"}
Switch RMEEntryPump (rme) {channel="rme:manager:m1:entrypump"}
Switch RMEWaterExchange (rme) {channel="rme:manager:m1:waterexchange"}
Switch RMECisternSupply (rme) {channel="rme:manager:m1:cisternsupplyalarm"}
Switch RMEOverflowAlarm (rme) {channel="rme:manager:m1:overflowalarm"}
Switch RMECisternBlockedAlarm (rme) {channel="rme:manager:m1:cisternblockedalarm"}
Switch RMEFilterCleaning(rme) {channel="rme:manager:m1:filtercleaning"}