# radoneye
This extension adds support for RadonEye (opens new window) radon bluetooth detector.
# Supported Things
Following thing types are supported by this extension:
| Thing Type ID | Description |
|---|---|
| radoneye_rd200 | Original RadonEye (RD200) |
# Discovery
As any other Bluetooth device, RadonEye devices are discovered automatically by the corresponding bridge.
# Thing Configuration
Supported configuration parameters for the things:
| Property | Type | Default | Required | Description |
|---|---|---|---|---|
| address | String | Yes | Bluetooth address of the device (in format "XX:XX:XX:XX:XX:XX") | |
| fwVersion | Integer | 1 | No | The major version of the firmware on the device |
| refreshInterval | Integer | 300 | No | How often a refresh shall occur in seconds |
# Channels
Following channels are supported for RadonEye thing:
| Channel ID | Item Type | Description |
|---|---|---|
| radon | Number:Density | The measured radon level |
# Example
radoneye.things (assuming you have a Bluetooth bridge with the ID bluetooth:bluegiga:adapter1:
bluetooth:radoneye_rd200:adapter1:sensor1 "radoneye Wave Plus Sensor 1" (bluetooth:bluegiga:adapter1) [ address="12:34:56:78:9A:BC", refreshInterval=300 ]
radoneye.items:
Number:Density radon "Radon level [%d %unit%]" { channel="bluetooth:radoneye_rd200:adapter1:sensor1:radon" }
Caught a mistake or want to contribute to the documentation? Edit this page on GitHub (opens new window)