# Govee

This extension adds support for Govee (opens new window) Bluetooth Devices.

# Supported Things

Only two thing types are supported by this extension at the moment.

Thing Type ID	Description	Supported Models
goveeHygrometer	Govee Thermo-Hygrometer	H5051,H5071
goveeHygrometerMonitor	Govee Thermo-Hygrometer w/ Warning Alarms	H5052,H5072,H5074,H5075,H5101,H5102,H5177,H5179,B5175,B5178

# Discovery

As any other Bluetooth device, Govee devices are discovered automatically by the corresponding bridge.

# Thing Configuration

Govee things have the following configuration parameters:

Thing	Parameter	Required	Default	Description
all	address	yes		The Bluetooth address of the device (in format "XX:XX:XX:XX:XX:XX")
all	refreshInterval		300	How often, in seconds, the sensor data of the device should be refreshed
goveeHygrometer¹	temperatureCalibration	no		Offset to apply to temperature² sensor readings
goveeHygrometer¹	humidityCalibration	no		Offset to apply to humidity sensor readings
goveeHygrometerMonitor	temperatureWarningAlarm		false	Enables warning alarms to be broadcast when temperature is out of specified range
goveeHygrometerMonitor	temperatureWarningMin		0	The lower safe temperature² threshold ³
goveeHygrometerMonitor	temperatureWarningMax		0	The upper safe temperature² threshold ³
goveeHygrometerMonitor	humidityWarningAlarm		false	Enables warning alarms to be broadcast when humidity is out of specified range
goveeHygrometerMonitor	humidityWarningMin		0	The lower safe humidity threshold ³
goveeHygrometerMonitor	humidityWarningMax		0	The upper safe humidity threshold ³

Available to both goveeHygrometer and goveeHygrometerMonitor thing types.
In °C
Only applies if alarm feature is enabled

# Channels

Govee things have the following channels in addition to the default bluetooth channels:

Thing	Channel ID	Item Type	Description
goveeHygrometer¹	temperature	Number:Temperature	The measured temperature
goveeHygrometer¹	humidity	Number:Dimensionless	The measured relative humidity
goveeHygrometer¹	battery	Number:Dimensionless	The measured battery percentage
goveeHygrometerMonitor	temperatureAlarm	Switch	Indicates if current temperature is out of range. ²
goveeHygrometerMonitor	humidityAlarm	Switch	Indicates if current humidity is out of range. ²

Available to both goveeHygrometer and goveeHygrometerMonitor thing types.
Only applies if warning alarms are enabled in the configuration.

# Example

demo.things:

bluetooth:goveeHygrometer:hci0:beacon  "Govee Temperature Humidity Monitor" (bluetooth:bluez:hci0) [ address="12:34:56:78:9A:BC" ]

demo.items:

Number:Temperature      temperature "Room Temperature [%.1f %unit%]" { channel="bluetooth:goveeHygrometer:hci0:beacon:temperature" }
Number:Dimensionless    humidity    "Humidity [%.0f %unit%]"         { channel="bluetooth:goveeHygrometer:hci0:beacon:humidity" }
Number:Dimensionless    battery    "Battery [%.0f %unit%]"         { channel="bluetooth:goveeHygrometer:hci0:beacon:battery" }

Caught a mistake or want to contribute to the documentation? Edit this page on GitHub (opens new window)

← Bluetooth - Bindings