This page is part of archived documentation for openHAB 2.5. Go to the current stable version

# Withings Binding v1

The Withings binding allows openHAB to synchronize data from the official Withings API to items. The following body measure types are supported: diastolic blood pressure, fat free mass, fat mass weight, fat ratio, heart pulse, height, systolic blood pressure, and weight.

# Binding Configuration

The binding can be configured in the file services/withings.cfg.

Property Default Required Description
refresh 360000 No The periodicity, in milliseconds, at which the binding requests Withings data. By default the Withings data is requested every 60 minutes (360000 milliseconds).
consumerkey Yes your consumer key
consumersecret Yes your consumer secret
redirectUrl Yes your redirect url

# Configuration for multiple accounts

If using multiple withings accounts, the following properties are required for each account.

Property Description
<accountId>.userid The userid for this account
<accountId>.token The token for this account
<accountId>.tokensecret The token secret for this account

To access Withings data, the user needs to authenticate via an OAuth 1.0 flow. The binding implements this flow through the command line interface. The first time the binding is started, it prints the following messages to the console:

#########################################################################################
# Withings Binding needs authentication. <Badge type="warn" text="v1"/>
# Execute 'withings:startAuthentication "<accountId>"' on OSGi console. <Badge type="warn" text="v1"/>
#########################################################################################

In order to start the authentication process, the user needs to execute withings:startAuthentication <accountId> on the OSGi console where <accountId> is an arbitrary key also used in the services/withings.cfg file in order to differentiate between the different credentials per Withings account.

The binding will print the following lines to the console:

#########################################################################################
# Withings Binding Setup:  <Badge type="warn" text="v1"/>
# 1. Open URL 'http://<auth-url>//' in your webbrowser <Badge type="warn" text="v1"/>
# 2. Login, choose your user and allow openHAB to access your Withings data <Badge type="warn" text="v1"/>
# 3. Execute 'withings:finishAuthentication "<accountId>" "<verifier>" "<user-id>"' on OSGi console <Badge type="warn" text="v1"/>
#########################################################################################

The user needs to open the given URL in a web browser, log in with his Withings credentials, and confirm that openHAB is allowed to access the user's data. At the end of this process, the user will be redirected to a page on github. There the user finds the command withings:finishAuthentication "<accountId>" "<verifier>" "<user-id>" with pre-filled parameters that is needed to finish the authentication.

The binding stores the OAuth tokens so that the user does not need to log in again. From this point, the binding is successfully configured.

# Advanced OAuth Configuration

The Withings Binding uses a default application registration to request an OAuth token. The application belongs to the binding developer. If the user wants to use his own application, the binding can be configured to use another OAuth consumer key and consumer secret. Please read the Withings documentation (opens new window) on how to register an application. After the application is created, Withings will generate a consumer key and secret. The redirect URL must be configured, too.

# Item Configuration

To bind a measure value to an item, the measure type has to be defined in the item binding config. Withings data can be bound to Number items only. The syntax for a Withings item binding is:

withings="<measure type>"

The following table shows the measure types and units that are supported by the binding:

Measure Type Binding Config Unit
Weight weight kg
Height height meter
Fat Free Mass fat_free_mass kg
Fat Ratio fat_ratio %
Fat Mass Weight fat_mass_weight kg
Diastolic Blood Pressure diastolic_blood_pressure mmHg
Systolic Blood Pressure systolic_blood_pressure mmHg
Heart Pulse heart_pulse bpm

# Examples

# Examples of multiple account configuration

thomas.userid=ImThomas
thomas.token=74c0e77021ef5be1ec8dcb4dd88c1xckusadwe92f9541c86799dcbbfcb8fc8b236
thomas.tokensecret=25f1098209xns511711b3287288f90740ff45532cef91658c5043db0b0e0c851c
peter.userid=PeterPeter
peter.token=74c0e77021ef5be1ec8dcb4dd88c1xckusadwe92f9541c86799dcbbfcb8fc8b236
peter.tokensecret=25f1098209xns511711b3287288f90740ff45532cef91658c5043db0b0e0c851c

# Item configuration examples

Number Weight     "Weight  [%.1f kg]"     { withings = "weight" }
Number FatRatio   "FatRatio [%.1f %%]"    { withings = "fat_ratio" }
Number HeartPulse "HeartPulse [%d bpm]"   { withings = "heart_pulse" }
Number PHeight    "Height  [%d in]"       { withings = "peter:height" }